- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+603-9054 6939
+6012-499 2103
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
+6013-399 2103
sales@redmarkindustry.comchuin@redmarkindustry.com
Cooper-Vialit Cohesion Pendulum
| Previous | 1 / 3 | Next |
Vialit Cohesion Pendulum by Cooper CRT-VCP is a testing device to analyse the cohesion of bitumen in road construction. The cohesion is one of the measures of the performance of a bituminous binder. It is important to use binders which have a sufficient level of cohesion according to the level of traffic to be supported. Cohesion has originally been developed for surface dressing however it can be used for any type of binder (pure, modified or fluxed) which is to be used in different types of road applications. Knowledge of cohesion enables the choice of binder type for given traffic and site conditions.
Key Features
- Automatic security safety catch avoiding pendulum to crash after test impact
- Incremental angle sensor in combination with a digital display resolution of 0,1°
- 24 cube and cube holder combinations, which allows an economic production of test samples (included)
- Efficient safety system in compliance with EC – machinery directive 2006/42/EC which allows comfortable handling with maximum operational reliability
- Module with built-in RS 232-port (allows the metering of test value via computer, retrofittable by user)
- Software available for full automation of test
Key Uses
- Bitumen
- Bitumen emulsions
- Flux bitumen
- User friendly, intuitive and reliable windows software developed with National Instruments LabVIEW™
- Results are taken for the binder under test, across the pre-determined temperature range and displayed in real time
- Results are stored in a single Microsoft Excel compatible csv file
- Previously stored data can be up-loaded to allow changes/additions to the tests already carried out on the binder under test
- On–screen chart shows the cohesion vs. temperature curve which updates in real time as new measurements are taken
- Translation of the software is available into most languages
- Retrofittable on previously supplied pendulums
| Angle Measurement Range | 360° |
| Angle Measurement Resolution | 0.1° |
| Pendulum Mass | (1925 ± 95) g |
| Pendulum Parked Position | (4 ± 1)° from the vertical |
| Radius at Point of Impact mm | (500 ± 1) |
| Distance from Pendulum Centre of Gravity to Shaft mm | (295 ± 2) |
| Ambient Temperature Range °C | (18 to 28) |
| Dimension mm (W x D x H) | 780 x 1000 x 1920 |
| Electrical Supply | 100-240 VAC, 50/60 Hz, 1A, 24W |
| Dimensions mm (WxDxH) | 1200 x 600 x 1320 |
| Estimated space required | Foot print 1200 x 600 x 1320 on bench top |
| Estimated Weight Kg | 150 |
| PC | Required for software- please enquire |