- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+603-9054 6939
+6012-499 2103
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
+6013-399 2103
sales@redmarkindustry.comchuin@redmarkindustry.com
Automatic Panel Spray Cabinet
| Previous | 2 / 16 | Next |
Automatic Panel Spray Cabinet
Laboratory needs to prepare a huge number of uniform coating test panels during the coating performance testing, and the coating results of traditional manual spraying mainly depends on the operator's experience and skills. So it is not only difficult to ensure the uniformity of the coating（especially when spraying a large area of tested panel, but also it have a certain risk to harm operator's the health and environment because of improper spraying operation. Biuged developed this Automatic Panel Spray Cabinet considering this situation and combined with other products in market, which has the following advantages:
- With 10-inch touch screen, powerful visual operation.
- The machine applied servo control system, the horizontal, vertical or cross spraying methods can be selected.
- The panel holder can rotate 90 degrees, which makes the coating more uniform. And the spraying area can be set freely, which will reduce the waste and save spraying time.
- User can set the parameters such as spraying speed, spraying pressure, atomizing, feeding and interval, etc. User also can edit and preset up to 8 spraying programs, which will help the operators who are not familiar with spraying operation to complete spraying with one key.
- The panel holder is easy to be disassembled, and panels can be quickly replaced. With magnetic panel holder and vacuum panel holder the machine can be used for substrates of different materials.
- Equipped with dual spray gun. Applied imported Graco LVMP automatic spray gun with nozzle diameter of 1.0mm.
- Easy-to-clean design, filter and scrap tray are slide-out structure. The cabinet is designed with a three-door structure, which is convenient to clean. The container adopts the disposable bottle.
- The cabinet is clean and inclosed. Equipped with air inlet filter system, it not only makes the spraying environment clean and the exhaust gas of paint mist is filtered, but also keeps the operators and mist completely separated, which is healthy and environmentally friendly.
- There are 30 layers of dust pads on both sides of the inwall. If the residual paint adheres too much, it can be torn off directly, which reduces the cleaning trouble caused by spraying paint around.
- Equipped with alarm system for flammable gas, the operation safety is improved.
- Equipped with the function of door limit switch. When the door is opened, the machine stops running, which can protect the safety of operators.
Main Technical Parameters
- Max. Spraying Area: 12 pcs panels with 150 mm × 70 mm （single spray gun）or total 315 mm × 460 mm （double spray gun）;
- Gun Moving Speed: 0-1,000mm/s in horizontal direction and 0-200mm/s in vertical direction;
- Spraying Distance: 100mm-300mm （can be adjusted automatically）
- System Pressure: 0-0.7MPa
- Atomization Pressure: 0-0.7MPa
- Overall Size: 980mm×1000mm×1850mm (W×D×H)
- Power Supply: 220V; 50/60HZ
- Total Power: 1.5KW;
- Ordering Information: BGD 227/V---Automatic Panel Spray Cabinet