- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+603-9054 6939
+6012-499 2103
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
+6013-399 2103
sales@redmarkindustry.comchuin@redmarkindustry.com
Hydrogen Sulfide Detector WT8822
| Previous | 7 / 16 | Next |
Hydrogen Sulfide Detector WT8822
Hydrogen sulfide (H2S) detector is novel-looking, compact and port- 2 able, which is designed for detecting hydrogen sulfide concentration. It uses high-quality gas sensor to achieve accurate measurement, stable performance with safety and reliability. It meets stability requirement of industrial site safety monitoring on equipment’s high reliability, widely used in household, chemical industry, mining industry,environmental protection, gas transmission and distribution, biochemical medicine, agricultural research and so on.
Features
Hydrogen Sulfide Detector possesses the following features:
1.HOLD data holding
2.MAX maximum value / MIN minimum value
3.UNIT switch units among %VOL, %LEL, PPM, (mg/M³)
4.Alarm setting
5.Calibration
6.On/Off (Timed Shutdown)
Specifications
Features
Hydrogen Sulfide Detector possesses the following features:
1.HOLD data holding
2.MAX maximum value / MIN minimum value
3.UNIT switch units among %VOL, %LEL, PPM, (mg/M³)
4.Alarm setting
5.Calibration
6.On/Off (Timed Shutdown)
Specifications
|
Measurement range of
hydrogen sulfide
|
0~100PPM
0~0.01VOL%
3 0~152mg/M
0~0.23LEL%
|
|
Maximum overload
|
500PPM
|
|
Response time
|
£¼30 s
|
|
Sensor Type
|
Electrochemical H2S sensor
|
|
Power supply
|
3*1.5V AAA batteries
|
|
Weight
|
111.9g(Without battery)
|
|
Dimensions
|
67.98*28.47*119.98mm
|