PH-520 Features: * 1 to 3 points calibration with automatic recognition for conductivity standards. *Automatic electrode diagnosis shows the calibration points and factors *Selectable cell constant, reference temperature, line-near and pure water compensation modes. Automatic temperature compensation ensures accurate readings over the entire range Auto-Read function senses and locks the measurement endpoint *Setup menu allows setting the number of calibration points, temperature unit, auto-power off, etc. Reset function automatically resumes all settings back to the factory defaults *Expanded memory stores or recalls up to 100 data sets * USB communication interface for data transfer connecting a power adapter to meter PH-530/531/540 Features: * 1 to 5 points calibration with automatic recognition for conductivity standards. *Automatic electrode diagnosis shows the calibration points and factors *Selectable cell constant, reference temperature, TDS factor, linear and pure water compensations, seater and practical salinity measurement modes Automatic temperature compensation ensures accurate readings over the entire range. Auto-Read function senses and locks the measurement endpoint *Calibration due alarm prompts user to calibrate the meter regularly Auto-Pover Off effectively conserves battery life. *Setup menu allows setting the number of calibration points, stabilityteria temperature unit, date and time, etc. *Reset function automatically resumes all settings back to the factory defaults *Expanded memory stores or recalls up to 500 data sets * USB communication interface is easy to transfer data to PC. *Muls-mode powerscheme (batteries, power adapter and USB port) ensures that using the meter smoothly. Accessories: Meter, CON-1 conductivity electrode, temperature probe, standard solutions and carrying case. Specification  read more

Automotive Tester / Car Battery Tester PCE-CBA 10 Car battery tester for testing 12V starter batteries / LC display /Starter and charging circuit measurement / Robust design / Easy to use The automotive tester PCE-CBA 10 is a car battery tester and allows fast and easy testing of 12V voltage starting batteries. The automotive tester has various test modes to determine the condition of the car battery. The LC display of the automotive tester guides the user intuitively through the settings and various modes of operation. The automotive tester is suitable for car batteries of the type DIN, KIS, IEC, EN, GB, SAE and MCA. To test the battery, the automotive tester can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.  Highlight - LC display - Multilingual menu - For 12V starter batteries - Different test modes - Fast measurement - DIN, JIS, EN, IEC, SAE, GB & MCA standards Specification  Measurement object 12V starter batteries Battery standards DIN, JIS, IEC, EN, GB, SAE, MCA Test time 3 ... 10 s Cold start current CCA 100 ... 1700 A Battery capacity 30 Ah ... 100 Ah Display 2.4'' LC display Power supply 12V DC over test voltage Connection Kelvin terminals Dimensions 124 x 73 x 22 mm / 4.8 x 2.8 x 0.8 in Cable length ca. 100 cm / 39 in Weight ca. 250 g / 8.8 oz Delivery Scope 1 x Automotive Tester / Car Battery Tester PCE-CBA 10 1 x User manual read more

Electric Vehicle EV Tester / EV Test Instrument for charging plugs type 1 and 2 / PP and CP simulation / Shock-proof socket connection / Direct acceptance of all connections via laboratory plugs Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently installed charging stations, also known as wallboxes. Often, measuring devices are already available to perform the required measurements. An EV test instrument is therefore required so that the measuring device can be connected to the charging station. The EV test instrument is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV test instrument. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EV test instrument has a shock-proof plug connection. The EV test instrument can be used to check the residual current device. A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces. The electric vehicle communicates with the charging station via the CP line (Control Pilot) and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EV test instrument is equipped with corresponding simulators. - CP and PP simulation - Transport bag included in delivery - Direct connection for wallboxes - Adapter with type 1 and type 2 charging plugs - PE conductor test - Integrated shock-proof socket Specification Functions   PE test (protective conductor) available, error PP simulation (charging cable coding)   open, 13 A, 20 A, 32 A, 63 A CP simulation (communication line) A, B, C, D, error Outputs (only for test purposes)   Measuring connections L1, L2, L3, N, PE   max. 250 / 430 V AC, 10 A   laboratory plug Schuko connection max. 250 V AC, 10 A Fuse from the Schuko connection fuse F 10 A / 250 V, 5 x 20 mm /  0.19 x 0.78'' CP signal output ± 12 V PWM     Further specifications   Input voltage 1 phase: 250 V AC / 3 phase 430 V AC,   50 / 60 Hz, max. 10 A     Charging cable connector Type 1 AC charging mode 3, compatible with IEC62196-1   Type 1 or SAE J1772 with vehicle connection   (Type 1, 5 pin, 1-phase)     Charging cable connector Type 2 AC charging mode 3, compatible with IEC62196-2   Type 1 or SAE J1772 with vehicle connection   (Type 2, 7 pin, 3-phase)     Measurement category CAT II 300 V Protection class IP54 Pollution degree 2 Operating conditions 0 ... 40 °C / 32 ... 104 °F, 10 ... 85% RH, non-condensing Storage conditions -10 ... 50 °C / 14 ... 122 °F, 10 ... 60% RH, non-condensing Maximum working height max. 2000 m / 6561 ft Dimensions (handheld only) 277 x 109 x 63 mm / 10.9 x 4.3 x 2.4'' Weight ca. 1 kg / 2.2 lb Delivery Scope 1 x EV Test Instrument PCE-EVSE 300 1 x Charging cable plug type 1 1 x Charging cable plug type 2 1 x Transport bag 1 x Instruction manual read more

Coating Thickness Gauge (Uee923) Explore our high-quality coating thickness measurement tools, utilizing both Magnetic Induction (Fe) and Eddy Current (NFe) technologies. Measure non-magnetic coating on magnetic metals and non-conductive coatings on non-magnetic substrates with precision. Benefit from PC connectivity, a built-in thermal printer, rechargeable battery, extensive memory, and versatile calibration options. Includes 5 calibration specimens and backed by a 3-year warranty and lifelong support Measuring Materials Magnetic Induction (Fe): Measuring the thickness of Non-magnetic coating on magnetic metal substrate, such as aluminum, chromium, copper, zinc, rubber, paint on the base of steel, iron, alloy and magnetic steel . Eddy Current (NFe): Measuring the thickness of Non-conductive coating on non-magnetic metal substrate, such as rubber, plastic, paint, oxide on the base of aluminum, copper, zinc, tin. Functions & Features High quality and precision Software for PC connection and data transmission, analysis, and printing measurement reports. With built-in thermal printer. Width of printer paper: 56.5±0.5mm. Rechargeable Li-ion battery, available for 10 hours working continuously. Large memory to save 4 types of materials and 1560 testing values. 3 ways for easy Calibration: by one specimen, two specimens or five specimens to finish calibration. Five statistics: Average, Max, Min, Testing times, Standard deviation. Standard delivery with 5 calibration specimens (48.5m、99.8m、249m、513m、1024m) 3 years warranty and life-long services Specification Model Uee923 Measuring  principle Magnetic induction (Fe ) & Eddy current ( NFe) Measuring range (µm) 0~1250μm Accuracy ±(1%H+1) μm    H refers to the thickness of testing piece Minimum resolution (µm) 0.1μm Min curvature of the min area (mm) Convex1.5   Concave9 Diameter of the min area (mm) Φ7 Critical thickness of substrate (mm) 0.5 Operating temperature 0℃~40℃ Memory 1560 Dimensions 238*90*38mm Weight 420g Printer Build-in High-speed Thermal Printer Power supply Rechargeable Li-ion battery   Main Machine,  probe*1(Fe or NFe), substrate*1(Fe or NFe), software & USB, Calibration specimens*5, Users’ Manual, Qualified Certificate, Paper for Printer,  Power Charger, Packing list, Warranty card Optional Accessories Probes, Specimens, Paper for printer PC Software Calibration  read more

LEEB - Ultrasonic Thickness Gauge Uee930 Functions & Features High quality and precision with 2 probes (Standard probe and Angle probe) Integrated with a 4mm calibration block. Two display units: mm and inch. With coupling state indication. Measuring sound velocity: according to the known thickness of the object, sound velocity of it can be measured directly. ●Software for PC connection and data transmission, analysis. 3 years warranty and life-long services Measuring Materials  Adapted to all kinds of materials which are good conductor of ultrasonic wave, such as metals(steel, cast iron, aluminum, copper and etc), plastic, ceramics, composites, epoxies, glass and etc Specification  Pictures read more

UEE-Ultrasonic Flaw Detector (Uee981 Series) Application Quickly and accurately detection, positioning, evaluation and dianogsis of various flaws in the work-piece, such as welding cracks, defects and etc. it widely used in steel structure industry, electric power, petrochemical, boiler and pressure vessel, railway transportation, automobiles, machinery and other fields. Functions & Features IP65, portable and ultra-thin design Meet the requirements of EN12668-1 Square wave pulser, PRF up to 3 kHz for fast scanning / detecting High-speed sampling for clear and stable echo diagram with all details High numbers of digital filters, suitable for nearly any application Anti-noise design, high signal-to-noise ratio, perfect for tough working conditions With standard DAC/ TCG /DGS/AVG function, Color B-Scan Built-in standards, AWS D1.1/D1.5. tools, flaw detection video recording Reports can be automatically formed and viewed on the equipment PC connection / Blue tooth connection to mobile for data management and reports printing on-site Stograge: 1000 groups of data (expandable); External USB for directly storage (unlimited memory) Battery life 10 hours, with fast independent charging control Language: English (expandable: German / Turkish / Korean / Spanish and etc)   Specification  read more

PosiTector® SPG  Surface Profile Gages for Blasted Steel, Textured Coatings, and Concrete Profile Surface Profile Gages use a digital depth micrometer to measure and record peak to valley surface profile heights in preparation for the application of coatings NEW Larger 2.8'' impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable PosiTector interchangeable platform—attach any PosiTector probe to a single gage body Fast measurement rate of over 50 readings per minute—for quickly measuring large surfaces USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to PTB included (Long Form) Conforms to ASTM D4417-B, ASTM D8271 (SPG TS only), AS 3894.5-C (with optional 30° tip), U.S. Navy NAVSEA NSI 009-32, US Navy NAVSEA PPI 63101-000, SSPC PA 17, SANS 5772, and others Advanced Models Includes ALL features as shown above plus... NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches SmartBatch™ allows entry of user-defined parameters and criteria to for quick statistical analysis comply with standards such as ASTM D4417 and SSPC PA-17 Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and. more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Features Simple Fast measurement rate of over 50 readings per minute—ideal for quickly and accurately measuring large surfaces NEW Larger 2.8'' impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable tips NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument—ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to PTB included Built-in temperature compensation ensures measurement accuracy Glass Zero Plate and metal check shim included Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17 Versatile PosiTector body accepts all PosiTector 6000, 200, RTR, SPG, DPM, IRT, SST, UTG, SHD, BHI, and GLS probes easily converting from a coating thickness gage to a surface profile gage, dew point meter, soluble salt tester, ultrasonic wall thickness gage, hardness tester, or gloss meter 30º angle interchangeable probe tip available for special surface profile applications Cabled probes available for blasted steel, textured coatings, and concrete profile NEW Auto rotating display with Flip Lock Selectable display languages Mils/Microns switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current       For Blasted Steel    MEASURING RANGE 0 – 500 μm        0 – 20 mils ACCURACY ± (5 μm + 5%)   ± (0.2 mils + 5%) TIP Angle: 60 Degree* Radius: 50 μm (2 mils) read more