PosiTest PT Pencil Hardness Test Determines the film hardness by pencil test (Wolff-Wilborn) in accordance with ISO 15184 and ASTM D3363 Quickly and easily evaluate the scratch resistance and relative hardness of coatings 14 quality graphite pencils—6B to 6H hardness values in a protective case Custom aluminum pencil sharpener specifically designed for the Pencil Hardness Test—includes 5 and 6 mm reference marks for precision graphite length Comes complete with everything needed for testing Optional Pencil Cart exerts a constant force of 7.35 N (~1.65 lbf) at the specified 45° angle (included with Complete Kit) Conforms to ISO 15184, ASTM D3363, JIS K-5600, BS 3900-E19, MIL C 27 227, ECCA-T4-1, SNV 37113, SIS184187, NEN 5350 Features Simple Quickly and easily evaluate the scratch resistance and relative hardness of coatings in accordance with ISO 15184 and ASTM D3363 For use on paint, films, lacquer, and resins 14 quality graphite pencils—6B to 6H hardness values – in a protective aluminum case—6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H, 4H, 5H, 6H Custom aluminum pencil sharpener with hardened steel blades specifically designed for the Pencil Hardness Test. Includes 5 and 6 mm reference marks for precision graphite length in conformance to national and international standards. Included pack of 400 grit sandpaper for flattening pencil leads prior to testing Comes complete with everything needed for testing Two year warranty Unlock accurate and reliable hardness testing with the PosiTest PT Pencil Hardness Test. read more

PosiTector DPM Dew Point Meters for Environmental Monitoring Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, wind speed, and difference between surface and dew point temperatures. Ideal for surface preparation as required by ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7, and US Navy NSI 009-32. NEW Larger 2.8'' impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure Fast response precision sensors provide accurate, repeatable readings Auto Log mode records environmental parameters at user selected time intervals PosiTector interchangeable platform—attach any PosiTector probe to a single gage body USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to NIST included (Long Form)   Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7, US Navy NSI 009-32, and Navy NAVSEA 009-32 Features Simple All readings are constantly updated and displayed simultaneously Alarms indicate when climate conditions are unsuitable for painting NEW Larger 2.8'' impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button No need to consult complex tables or use a slide rule calculator Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Fast response precision sensors provide accurate, repeatable readings SmartTrend™ Indicators identify rising, falling, or stable readings Certificate of Calibration included showing traceability to NIST Conforms to national and international standards including ISO and ASTM Powerful NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Every stored measurement is date and time stamped Versatile Auto Log mode records environmental parameters at user selected time intervals NEW Auto rotating display with Flip Lock PosiTector DPM L attaches to steel structures to measure and record environmental parameters independently for up to 200 days. Stored datasets can be downloaded using a PosiTector Advanced gage body or Apple/Android smart device. Celsius/Fahrenheit switchable Selectable display languages Specification   Range Accuracy  Resolution Surface Temperature    -40° to 80° C ± 0.5° C 0.1° C   80° to 190° C ± 1.5° C -40° to 175° F ± 1° F 0.1° F   175° to 375° F ± 3° F Infrared Surface Temperature*   -70° to 380° C ± 1° C + 1%** 0.1° C -94° to 716° F ± 1.8° F + 1%** 0.1° F Air Temperature    -40° to 80° C ± 0.5° C 0.1° C -40° to 175° F ± 1° F 0.1° F Humidity  0 to 100% ± 3% 0.1% Wind Speed†   0 to 20 m/s ± 3% Full Scale   0.1 m/s 0 to 44 mph 0.1 mph Dew Point   -60° to 80° C ± 3° C‡ 0.1° C -76° to 175° F ± 5.4° F‡ 0.1° F Optimize your surface preparation and ensure accurate coating applications with the PosiTector DPM. read more

PosiTestor UTG Ultrasonic Thickness Gage Measures Wall Thickness Measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes, or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Precision ultrasonic transducers provide fast, accurate readings NEW Larger 2.8'' impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure Pre-programmed velocities—Simply select from a list of common materials or enter your own with ease Min Scan mode—take continuous readings and record min/max thicknesses — ideal for quick inspection PosiTector interchangeable platform—attach any PosiTector probe to a single gage body USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Conforms to ASTM E797 Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8'' impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector 6000, 200, RTR, SPG, DPM, IRT, SST, UTG, SHD, BHI, and GLS probes easily converting from a coating thickness gage to a surface profile gage, dew point meter, soluble salt tester, ultrasonic wall thickness gage, hardness tester, or gloss meter NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Equip yourself with the precision and reliability of the PosiTector UTG read more

PosiTector GLS (Gloss Meter) Gloss Meter Portable gloss measurement for all surface finishes Larger 2.8'' impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body—IP65-rated enclosure Automatic Diagnosis and Auto Calibration performed upon power-on using the protective base plate with integrated calibration standard (tile) Fast measurement speeds of 60+ readings per minute 2 Powerful Scan Modes for quantifying large surfaces (Advanced models only) USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Conforms to ASTM C584/D523/D4039, ISO 2813/7668, DIN 67530, JIS Z 8741, AS/NZS 1580.602.2 Features Simple Fast measurement speed—60+ readings per minute Larger 2.8'' impact resistant color touchscreen with redesigned keypad for quick menu navigation On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable All-metal probe construction for long term stability Weatherproof, dustproof, and water-resistant gage body—IP65-rated enclosure Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument—ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits—can be used as Pass/Fail for quick inspection Instant-on feature quickly powers up the gage if recently powered down Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included View pre-formatted reports and .csv data with PosiSoft USB Drive—no software installation required Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Accurate Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Automatic Diagnosis and Auto Calibration upon power-on using the protective base plate with integrated calibration standard (tile) Store multiple calibration standards (tiles) for quick calibration adjustment Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector probes easily converting to a coating thickness gage, dew point meter, soluble surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage Selectable units for each geometry—Gloss and % Reflectance Auto rotating display with Flip Lock Selectable display languages Specifications   Transform your surface measurement process with the PosiTector GLS.  read more

Data logger for temperature and humidity with connection for thermocouple type K / Measuring range -20 ... 60 °C /Rechargeable battery / Micro USB data interface / PC software / Data memory for 32,000 measuring points / Optionally with ISO calibration certificate   The data logger for temperature and humidity is the ideal measuring device to check the climatic conditions in, for example, warehouses, production halls or greenhouses. The data logger for temperature and humidity can measure the ambient temperature and humidity. Temperatures between -20 ... 60 °C (-4 ... 140 °F) can be measured reliably and quickly by the data logger for temperature and humidity. In addition, the dew point and wet bulb temperature is calculated and displayed by the data logger for temperature and humidity. In addition, any type K thermocouple can be connected to the data logger for temperature and humidity in a temperature range of -100 ... 1372 °C (-148 ... 2501 °F). As soon as the connected thermocouple has been recognized, the temperature display automatically switches from the data logger for temperature and humidity to the thermocouple. Measured values ​​can be recorded with the data logger function of the temperature and humidity meter. The large memory of 32,000 measuring points in the data logger for temperature and humidity allows recording of measured values ​​over a long period of time. After data logging, all logged measuring points can be read out and analyzed via the micro-USB interface of the data logger for temperature and humidity and the free software. The data logged by the data logger for temperature and humidity can be exported in CSV file format for further processing. A 3.7 V Li-ion battery is installed in the data logger for temperature and humidity to enable mobile use. This battery can be recharged via the micro-USB interface on the data logger for temperature and humidity. Highlights - Measuring range -20 ... 60 °C / -4 ... 140 °F - Temperature, humidity, dew point - Backlit LC display - Micro USB interface - Rechargeable battery - Data memory for 32,000 readings - Wet bulb temperature - Optionally with ISO calibration certificate   Specification Air temperature   Measuring range -20 … 60 °C（-4 … 140 °F） Resolution 0.01 °C/°F Accuracy ±0.5 °C @ 0 … 45 °C，±1.0 °C    in remaining range   ±1.0 °F @ 32 … 113 °F，±2.0 °F    in remaining range Measuring rate 3 Hz     Relative humidity   Measuring range 0 … 100 % RH Resolution 0.1 % RH Accuracy ±2.2 % RH (10 … 90 % RH)   @ 23 °C (73.4 °F)   ±3.2 % RH (<10，>90 % RH)    @23 °C (73.4 °F) Response time <10 s (90 % RH, 25 °C (77 °F), with no wind)     Thermoelement   Sensor type Thermoelement Type K Measuring range -100 … 1372 °C（-148 … 2501 °F） Resolution 0.01 °C/°F, 0.1 °C/°F, 1 °C/°F Accuracy ±(1 % ±1 °C)     Calculated values   Wet bulb temperature   -20 … 60 °C （-4 … 140 °F） Dew point temperature -50 … 60 °C （-58 … 140 °F）     Further specifications   Internal memory 99 measuring points   (redundant, only readable on the measuring device)   32,000 measuring points   (only readable on the PC) Power supply 3.7 V Li-ion battery Operating conditions 0 … 40 °C (32 … 104 °F) <80 % RH,   non-condensing Storage conditions -10 … 60 °C (14 … 140 °F) <80 % RH,   non-condensing Dimensions 162 mm x 88 mm x 32 mm / 6.3 x 3.4 x 1.2'' Weight 248 g / 8.74 oz Delivery Scope 1 x Data Logger for Temperature and Humidity PCE-THD 50 1 x Type K thermocouple 1 x USB cable 1 x PC software 1 x Instruction manual read more

Insulation meter with measured value memory / Measurement functions: PI/DAR/HOLD / Automatic shutdown / Battery operated / LC display 3.7 inches with backlight The insulation meter is designed to simplify on-site troubleshooting in both industrial and solar installations. With selectable test voltages of 250 ... 2500 V and resistance measurement up to 200 GΩ can be carried out with a single tool thanks to this device. The intuitive user interface, short-circuit current of up to 1.8 mA, and CAT IV 600 V safety make these portable high-voltage insulation meters ideal for fast and stable resistance measurements anywhere. The test voltage can be variably selected with 250 V, 500 V, 1000 V, 2000 V and 2500 V. In addition, it can also handle AC and DC voltages of 10 ... 600 V. The isolation meter has a memory for 100 data records, which can be called up via the LC display. In addition to the data hold function, the insulation meter offers the possibility to measure the Polarization Index (PI) and the Dielectric Absorption Ratio (DAR). These features are particularly useful for condition monitoring and maintenance of electrical insulation, as they help identify potential problems early on and extend the life of the equipment. A high-voltage indicator ensures safety during operation and a low-battery indicator indicates in good time that a battery change is necessary. The instrument is particularly suitable for measuring insulation resistances on various electrical devices and insulation materials such as motors, cables, switches and other electrical components, making it ideal for maintenance, repair and testing work. With its modern design and stable performance, the device convinces in every respect. For easy storage and convenient transport, the insulation knife comes in a handy zippered bag. Characteristics - DC voltage DC - AC voltage AC - Selectable test voltages - Measurement functions: PI/DAR/HOLD - Internal memory - Display of the measurement time - Automatic discharge - Automatic shut-off - High voltage indicator - Safety: EN 61010-1; CAT III 1000V; CAT IV 600 V Specification DC voltage DC   Measuring range 10 ... 600 V Resolution 1 V Accuracy ±(0.8% v.Mw. +5 digits)     AC voltage AC   Measuring range 10 ... 600 V Resolution 1 V Accuracy ±(1% v.Mw. +5 digits) Overload 2000 V AC max. 1 minute     Insulation resistance   Test voltage DC 1000 V Measuring range 1 M Ω ... 20 GΩ Resolution 0.01 m Ω Accuracy ±(5% v.Mw. +10 digits)     Insulation resistance   Test voltage DC 2500 V Measuring range 5 m Ω ... 200 GΩ Resolution 0.01 m Ω Accuracy ±(5% v.Mw. +10 digits)     General technical data   Measurement functions HOLD, PI, DAR Display Type LCD Display size 3.7 inches Recording medium Internal memory Storage capacity 100 records Standard(s) EN 61010-1 Automatic shut-off 25 min Safety standard CAT III 1000V , CAT IV 600 V Language English (US) Protection class (device) IP20 Weight 651 g Service conditions 0 ... 35 °C , 0 ... 75 % RH Storage 0 ... 35 °C , 0 ... 75 % RH     Battery/Battery 8 x 1.5V AA Battery, Alkaline Manganese Capacity 2500 mAh Dimensions ( L x W x H ) 140 x 180 x 70 mm Scope of delivery 1 x Insulation Knife PCE-MO 1500 2 x Alligator Clip 3 x test lead approx. 1 m 8 x 1.5 V AA batteries 1 x User Manual 1 x Equipment Bag read more

Microscope / image and video recording functions / 400 ... 800x magnification / can be connected to PC via USB-C interface / single and time-controlled continuous recording / for indoor and outdoor use / small and portable Our Microscope offers 400 ... 800x magnification and a 2-inch IPS HD screen to capture images and videos. Six dimmable LEDs ensure optimum illumination and thanks to the two brightness levels, objects can also be recognised in dark environments. The Microscope supports image and video recording functions, images can be captured during observation and saved on a micro SD memory card (not included, max. 32 GB). The Microscope can also be connected to a PC via a USB cable to display objects on a larger screen. Various recording modes are available, including single recording and timed continuous recording (2, 3, 5 or 10 seconds). Our Microscope enables automatic image capture at set time intervals with the continuous capture function and is ideal for long-term observations and time-lapse studies. Loop recording offers adjustable intervals from 5 seconds to 30 minutes. Focus and exposure can be adjusted as required. Various colour effects such as black and white and reminiscence are available. The auxiliary line function includes options such as core and cross and enables precise positioning and measurement of samples. Our Microscope supports 22 menu languages, displays the date and time on screen and has a memory card formatting function. Furthermore, the loop recording function enables continuous video recordings, whereby older recordings are automatically overwritten when the memory is full. This is particularly useful for longer monitoring sessions. With a compact size of 165 x 60 x 60 mm and an integrated, rechargeable lithium battery with an operating time of up to 3 hours, it is suitable for mobile use. The microscope switches to standby mode after 30 seconds, 1 minute or 2 minutes of inactivity to save energy. When connected to a PC, the image can be transferred to the computer monitor or the memory can be read out directly. The Microscope is a widely used instrument for various purposes. It is used for inspecting printed circuit boards, observing plant roots and checking the quality of textiles, among other things. This microscope could therefore be suitable for teachers, students, adults, craftsmen, parents of young children, farmers or simply for beginners in the world of microscopy. Highlights - 2-inch HD LCD screen - image and video recording functions - resolution: image: JPG 2 MP / video: 720Pixel 30fps - 400 ... 800x magnification - single and time-controlled continuous recording - 6 dimmable LEDs - 22 menu languages - USB-C interface - for indoor and outdoor use - date and time display - automatic power off - standby function Specification General technical data   Display type   IPS Display size   2 Inch Display resolution   320 x 240 Storage medium   Micro SD card Storage capacity   32 GB Interface   USB-C Resolution   Video: 720 pixels, 1080 pixels (adjustable) Image: JPG 2 megapixels Operating time   3 h Automatic power-off from...to   3 ... 10 min. Automatic power-off can be deactivated   Yes Light source   6 dimmbare LED's Magnification   400 ... 800 x Menu language   English, German, French, Italian, Spanish, Dutch, Portuguese, Danish, Turkish, Polish, Russian, Chinese, Japanese, Korean, Czech, Hebrew, Hungarian, Arabic, Thai, Romanian, Swedish Protection class (device)   IP20 Power supply   5 V, 1 A Weight   131 g Operating conditions   10 ... 50 °C , 0 ... 85 % r.F Storage conditions   10 ... 50 °C , 0 ... 85 % r.F Capacity   700 mAh Dimensions ( L x W x H )   165 x 60 x 60 mm Delivery Scope 1 x Microscope PCE-DHM 5 1 x USB-C cable 1 x user manual 1 x storage bag 1 x cleaning cloth   Note: Micro SD card not included! read more

Power analyzer for energy monitoring / Configuration and data transmission via app / Measurement without interruption of the power supply / Incl. test leads / Compact design The power analyzer measures current and voltage values using the connected current transformers and test leads. From this, the active, apparent and reactive power is determined and transmitted to the measuring platform every second via WLAN. There, the data is stored historically, graphically processed and can be evaluated or exported. Measurement with the power analyzer is carried out via Rogowski coils or folding current transformers. Alternatively (if there is no internet connection), the data can be recorded in the built-in, 8 MB flash memory in the form of a CSV file for further processing later. An SD card adapter is also available as an accessory, which means that the recording time is more than a year, even when recorded to the second. It is also possible to send the CSV files periodically via e-mail, upload them to a server via FTP or transfer them to the measurement platform after the measurement has been completed. Interaction with the power analyzer is mainly via WLAN and web browser or via app (BLE). The power supply and measurement is carried out via magnetic measuring tips and connection terminals or test probes. The power analyzer can be connected to any main and sub-distribution as well as to devices and systems - the power supply does not have to be interrupted. Managing the power supply is a top priority. Without measuring consumption and recording instrumental values such as current, voltage, frequency and power, it is hardly possible to improve efficiency. The energy meter allows you to monitor the total energy consumption and helps to reduce energy costs. Characteristics - Active, apparent and reactive power - Power factor and electrical work - 8 MB internal memory - App for Android - Data as CSV file - Measurement via Rogowski coils - No additional grid connection necessary   Specification AC voltage AC   Measuring range 40 ... 400 V Resolution 0.01 V Accuracy ±1% v.Mw.     Wechselstrom AC   Measuring range 0 ... 80 A Resolution 0.01 A Accuracy ±1% v.Mw.     Active power   Measuring range 0 W ... 32 kW Resolution 0.01 W Accuracy ±1% v.Mw.     Reactive power   Measuring range 0 VAR ... 32 kVAR Resolution 0.01 VAR Accuracy ±1% v.Mw.     Apparent power   Measuring range 0 VA ... 32 kVA Resolution 0.01 VA Accuracy ±1% v.Mw.     Power factor   Measuring range 0 ... 1 Resolution 0,01 Accuracy ±1% v.Mw.     General technical data   Sampling Rate 26000 Hz Recording medium Internal memory Storage capacity 8 MB Storage capacity (additional information) separate phases: 22000 records, combined phases: 38000 records Storage interval of 1 s Storage interval to 60 min. Current Consumption Power Analyzer 100 mA DC Maximum cable diameter 10 mm Safety standard CAT III 300V Fuse(s) 250mA, FA, IR>=30kA Language German, English (GB), English (US), Spanish, French Protection class (device) IP40 Power supply 100 ... 240 V 50/60 Hz (+/- 10%) (between neutral and phase A) Weight 202 g Service conditions -5 ... 40 °C , 0 ... 80 % RH Storage -5 ... 40 °C , 0 ... 80 % RH Dimensions ( L x W x H ) 123 x 96 x 36 mm Scope of delivery 1 x Power Analyzer PCE-PA 6500 R11 4 x test leads (blue, brown, black, grey) 2 m 3 x folding current transformers 3 x magnetic measuring adapters 6.6mm 1 x pick-up (''crocodile'') clamp blue 1 x User Manual 1 x Service Bag   The ''PCE-PA 6500'' app can be found in the Play Store or in the download area. read more

Power analyzer for energy monitoring / Configuration and data transmission via app / Measurement without interruption of the power supply / Incl. test leads / Compact design The power analyzer measures current and voltage values by means of the connected current transformers and test leads. From this, the active, apparent and reactive power is determined and transmitted to the measuring platform every second via WLAN. There, the data is stored historically, graphically processed and can be evaluated or exported. Measurement with the power analyzer is carried out via Rogowski coils or folding current transformers. Alternatively (if there is no internet connection), the data can be recorded in the built-in, 8 MB flash memory in the form of a CSV file for further processing later. An SD card adapter is also available as an accessory, which means that the recording time is more than a year, even when recorded to the second. It is also possible to send the CSV files periodically via e-mail, upload them to a server via FTP or transfer them to the measurement platform after the measurement has been completed. Interaction with the power analyzer is mainly via WLAN and web browser or via app (BLE). The power supply and measurement is carried out via magnetic measuring tips and connection terminals or test probes. The power analyzer can be connected to any main and sub-distribution as well as to devices and systems - the power supply does not have to be interrupted. Managing the power supply is a top priority. Without measuring consumption and recording instrumental values such as current, voltage, frequency and power, it is hardly possible to improve efficiency. The energy meter allows you to monitor the total energy consumption and helps to reduce energy costs. Characteristics - Active, apparent and reactive power - Power factor and electrical work - 8 MB internal memory - App for Android - Data as CSV file - Measurement via Rogowski coils - No additional grid connection necessary   Specification AC voltage AC   Measuring range 40 ... 400 V Resolution 0.01 V Accuracy ±1% v.Mw.     Wechselstrom AC   Measuring range 2 ... 1250 A Resolution 0.01 A Accuracy ±1% v.Mw.     Active power   Measuring range 80 W ... 500 kW Resolution 0.01 W Accuracy ±1% v.Mw.     Reactive power   Measuring range 80 VAR ... 500 kVAR Resolution 0.01 VAR Accuracy ±1% v.Mw.     Apparent power   Measuring range 80 VA ... 500 kVA Resolution 0.01 VA Accuracy ±1% v.Mw.     Power factor   Measuring range 0 ... 1 Resolution 0,01 Accuracy ±1% v.Mw.     General technical data   Sampling Rate 26000 Hz Recording medium Internal memory Storage capacity 8 MB Storage capacity (additional information) separate phases: 22000 records, combined phases: 38000 records Storage interval of 1 s Storage interval to 60 min. Current Consumption Power Analyzer 100 mA DC Maximum cable diameter 49 mm Safety standard CAT III 300V Fuse(s) 250mA, FA, IR>=30kA Language German, English (GB), English (US), Spanish, French Protection class (device) IP40 Power supply 100 ... 240 V 50/60 Hz (+/- 10%) (between neutral and phase A) Weight 202 g Service conditions -5 ... 40 °C , 0 ... 80 % RH Storage -5 ... 40 °C , 0 ... 80 % RH     Dimensions ( L x W x H ) 123 x 96 x 36 mm Scope of delivery 1 x Power Analyzer PCE-PA 6500 F50 4 x test leads (blue, brown, black, grey) 2 m 3 x Rogowski Coils 3 x magnetic measuring adapters 6.6mm 1 x pick-up (''crocodile'') clamp blue 1 x User Manual 1 x Service Bag read more