- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
chuin@redmarkindustry.com
Microcomputer controlled Cupping Testing Machine
| Previous | 9 / 18 | Next |
- Universal Tensile Machine KL
- Universal Tensile Machine Selangor
- Universal Tensile Machine Penang
- universal tensile singapore
Microcomputer controlled Cupping Testing Machine
˘ń. Features
This machine is a special equipment for the ductility test of metal sheets and strips, and it is also the only equipment for evaluating the plastic deformation properties of metal materials in China, to test the anisotropy of various metal sheets.
It adopts hydraulic clamping and hydraulic stamping compound oil cylinder; the sample will automatically stop when cracks occur, and it is easy to observe the crack; it has a peak value memory function, that is, the maximum punching force and maximum deformation depth are automatically memorized; the punch and sample are replaced, and the loading and unloading is convenient.
The main features of this product are that the accuracy of the cupping value is 0.01mm, the control and measurement accuracy of the main load test force is 1N, and the loading speed of the main test force is controlled at a constant rate, thus greatly improving the control accuracy of the machine. Controlled mechanical loading, wheel-spoke sensor force measurement, which improves the test accuracy of the main test force and the rupture accuracy of the control sample.
A high-precision encoder is used to measure the cupping value. In terms of test accuracy, the decimal point can be guaranteed. The accuracy of the last two digits. The test process is automatically controlled by computer and analyzed automatically.
Standard:ISO 20482-2013
˘ň.Specification:
1. Plate thickness: 0.1~2mm (high-precision sensor, can realize ultra-thin plate test)
2. Plate width: 90-100mm;
3. Punch stroke: 40mm;
4. The tightening piston stroke is 40mm.
5. Stamping load: 100kNmax.
6. Maximum clamping load: 10kN.
7. Resolution of cupping value: 0.01mm
8. Test speed: 2-100mm/min
9. Cupping test mold specifications:
ˇńStandard punch ball: φ20±0.05mm
ˇńStandard Pad Die Aperture: φ33±0.1mm
ˇńStandard stent aperture: φ27±0.05mm
10. Non-standard molds can be provided for special orders. Cupping testing machine that can meet international standards such as American Standard and European Standard.
11. Hydraulic oil: No. N46 hydraulic oil (available in general gas stations).
12. Dimensions: 700×360×1700 (mm)
13. Power supply: AC220V
14. Weight: 450Kg
Optional part:
1.Earing test ISO 11531
Principle
This International Standard specifies a method fordetermining the ear height of metal sheet and stripof nominal thickness from 0,1 mm to 3 mm after deep drawing.
It is a test that uses a cylindrical punch to press the clamped metal sheet or strip sample into a specified die to form a cylindrical cup to show the anisotropy of the material expressed by the ear-making rate.