- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+603-9054 6939
+6012-499 2103
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
+6013-399 2103
sales@redmarkindustry.comchuin@redmarkindustry.com
Electrical Tester PCE-MO 2010
| Previous | 2 / 12 | Next |
Electrical Testerin robust housing / 4-wire measuring method / maximum test current of 10 A / LC display with illumination / incl. software
The electrical tester with seven selectable measuring ranges from 0 µΩ to 200 Ω, a maximum resolution of 0.1 µΩ and a maximum test current of 10 A offers a wide range of applications. Thanks to the 4-wire measuring method, the electrical tester guarantees accurate measurements at the smallest resistances without the influence of the lead resistance. It can therefore be used for a wide range of applications, e.g. to detect poor contact between two measuring points, measurements on switches, continuity of earth connections or for testing metal coatings.
The illuminated LC display of the electrical tester makes it easy to read the measurement results, even in unfavourable lighting conditions. With an internal memory for up to 200 measured values and a low battery indicator, the device offers additional user-friendliness and makes the electrical tester an indispensable tool for preventive maintenance. The data can be transferred to the software via the optical RS232 interface and a text document with the measurement data can also be exported. The practical case and a bag for the test leads make it easy to transport the measuring device.
Highlight
- 4-wire measuring method
- LC display 5.1 inch with illumination
- Internal memory
- Automatic switch-off
- Date and time display
Specification
Specification
| Resistance | |
| Measuring range | 0 µΩ ... 200 µΩ |
| Resolution | 0.1 µΩ |
| Accuracy | ±(2% + 8 digit) |
| Resistance | |
| Measuring range | 0 µΩ ... 2000 µΩ |
| Resolution | 1 µΩ |
| Accuracy | ±(2% + 8 digit) |
| Resistance | |
| Measuring range | 0 mΩ ... 20 mΩ |
| Resolution | 0.01 mΩ |
| Accuracy | ±(1% + 4 digit) |
| Resistance | |
| Measuring range | 0 mΩ ... 200 mΩ |
| Resolution | 0.1 mΩ |
| Accuracy | ±(1% + 4 digit) |
| Resistance | |
| Measuring range | 0 Ω ... 2 Ω |
| Resolution | 1 mΩ |
| Accuracy | ±(1% + 4 digit) |
| Resistance | |
| Measuring range | 0 Ω ... 20 Ω |
| Resolution | 0.01 Ω |
| Accuracy | ±(1% + 4 digit) |
| Resistance | |
| Measuring range | 0 Ω ... 200 Ω |
| Resolution | 0.1 Ω |
| Accuracy | ±(1% + 4 digit) |
| General technical data | |
| Display type | LCD with illumination |
| Display size | 5.1 inch |
| Storage medium | Internal memory |
| Memory capacity | 200 values |
| Interface | RS232 |
| Standard(s) | IEC61010-1, EN 61326-1 |
| Automatic switch-off | 3 min |
| Safety standard | CAT III 300V |
| Measurement method | 4-wire method for mΩ measurement |
| Test current |
10 A: 200.0 μΩ / 2000 μΩ 1 A: 20.00 mΩ / 200.0 mΩ 100 mA: 2.000 Ω / 20.00 Ω 10 mA: 200.0 Ω |
| Menu language | English |
| Protection class (device) | IP30 |
| Power supply | 24 VDC / 0.625 A |
| Plug type | Euro plug device |
| Weight | 3126 g |
| Dimensions (L x W x H) | 322 x 260 x 135 mm |
| Operating conditions | 0 ... 40 °C , 0 ... 80 % r.H |
| Storage conditions | 0 ... 40 °C , 0 ... 40 % r.H |
| Accumulator/battery | 1x 14.8 V , lithium-ion battery |
| Capacity | 5200 mAh |
Delivery Scope
1 x electrical tester PCE-MO 2010
2 x 2.5 m test leads with Kelvin clamps
1 x data transmission cable
1 x PC software on USB stick
1 x power supply 24 VDC / 0.625 A
1 x shoulder strap
1 x bag for test leads
1 x operating instructions